アップした時点では
GoogleまたはGoogle Scholarで全文にアクセス可能でした。
Full Length Papers(Scramjet)(2024)
2024・Study on solid powder fuel transport characteristics and mixing degree in scramjet combustor
・Instability of isolator shocks to fuel flow rate modulations in a strut-stabilised scramjet combustor
・PROPULSIVE CFD ANALYSIS OF THE SCRAMJET HYPERSONIC EXPERIMENTAL VEHICLE
・LAUNCH SYSTEM ASSESSMENT OF AN EXPERIMENTAL HYPERSONIC SCRAMJET VEHICLE
・Investigation of unswept ramp system with lobe shape nozzle for fuel mixing of hydrogen jet at a scramjet engine
・Numerical Investigation of Non-premixed Oblique Detonation Operations in Scramjet Combustor
・RAMJET/SCRAMJET TEST BENCH WITH CAVITY INJECTION OF HYDROGEN
・Numerical Study on the Unsteady Behavior of the Solid-Fuel Scramjet
・Advancement of Hypersonic Propulsion: Analysis of Scramjet Technology
・Chemical timescale analysis of the Partially Stirred Reactor model in a hydrogen-fuelled scramjet
・Numerical simulation research for scramjet inlet separation control
・Flow Effects and Propulsion Performance on Various Single Expansion Ramp Nozzle Configurations of Scramjet Engine
・ANALYTICAL ESTIMATION OF COMBUSTOR LENGTH OF THE UFRN'S SCRAMJET DEMONSTRATOR BASED ON CONCEPTS OF CHEMICAL KINETIC
・AN OPTIMAL CONTROL APPROACH TO RAYLEIGH AND FANNO FLOWS IN SCRAMJET ENGINES
・Effect of Kerosene Dual-Jet Spacing on the Mixing and Combustion Characteristics of a Scramjet Combustor
・Conceptual study of a scramjet with symmetrical internal compression system
・Flame stabilization and combustion enhancement in a scramjet combustor by varying strut injection angles
・Research on the combustion organization mechanism of synchronized injection in the upstream and downstream of the cavity in scramjet
・Supercritical Catalytic Cracking of n-dodecane for Cooling in Scramjet Engines.
・Evaluation of Influences of Changed Lower Cover Geometry on Kerosene?Air Interaction in a Scramjet Combustor
・A Numerical Model for Scramjet and Ramjet Efficiency Study during Dual and Individual Modes of Operation
・Numerical Investigation of Flow Structures and Combustion Mechanisms with Different Injection Locations in a Hydrogen-Fueled Scramjet Combustor
・High fidelity simulations of unstart phenomena in a scramjet inlet due to angle of attack
・Hydrogen Fuel Injection and Combustion Study for Mach 10-12 Scramjet
・Influence of thermochemical non-equilibrium effects on non-uniform entrance scramjet nozzle
・Characterization of the hydrogen combustion process in a scramjet engine
・Parametric Study of Flow and Combustion Characteristic in a Cavitied Scramjet with Multi-Position Injection
・Experimental Investigation of Solid Rocket Scramjet Based on Central Strut
・Combustion simulations of scramjet combustor using reduced mechanism of surrogate fuel for regenerative cooling pyrolysis products
・Large eddy simulation of boundary layer combustion of hydrogen and hydrocarbon fuel films in a modeled scramjet combustor
・Experimental Investigation on Pressure and Flame Surface Oscillation in a Dual-Cavity Scramjet Combustor
・Research on the Zooming Method for Determining the Flow, Heat Transfer, and Infrared Radiation of an Air-Breathing Hypersonic Vehicle Powered by a Scramjet
・Computational Fluid Dynamics of a Scramjet
・Flame state recognition method of a scramjet based on PLIF image fusion features and an artificial neural network
・Numerical Study on the Ducted Scramjet Combustor
・The Effect of Leading Edge Bluntness on Scramjet Performance
・Dynamic Flow and Heat Transfer Characteristics of Uncracked Hydrocarbon Fuel under Super-Critical Pressure in Cooling Channel of Regeneratively-Cooled Scramjet
・Mode Identification and Decomposition Analysis of Self-excited Thermodynamic Oscillations in Hypersonic Inlet/Isolator of a Scramjet
・NUMERICAL STUDY OF A REGENERATIVE COOLING JACKET IN A SCRAMJET INLET
・Drag reduction characteristics of recirculation flow at rocket base in an RBCC engine under ramjet/scramjet mode